The operation of the droplet eliminators takes place under the influence of aggressive chemical environment and high temperatures. For example, natural gas contains up to 25% sulfur-containing impurities and non-combustible inert gases. This makes it impossible to install separating structures made of metal, steel or plastic.
We use fiberglass for the manufacture of droplet eliminators and driers. It is distinguished by its high strength and inertness to aggressive media, and is absolutely resistant to corrosion. The use of structures made of fiberglass allows you to reduce the cost of installation and service work. This is due to the low weight and durability of such a material. Our droplet eliminators and driers have a lifespan of over 20 years.
Gas dryers operate on the absorption principle. Moisture is removed from the gas mixture when it comes into contact with the granular sorbent. By absorbing excess moisture, it dissolves further, forming a saline solution that flows down to the bottom of the desiccant, where it is subsequently removed.
The principle of operation of the flue is that it provides natural or forced draft, because without the access of oxygen, the combustion process cannot take place. In this case, it is through the gas duct that the combustion products are emitted into the atmosphere.
Your request was successfully sent
Thank you for your feedback on our job. The HR Department will review your resume and contact you within seven to ten business days.
Your information was sent successfully
Our experts will consider your question and contact you as soon as possible.
Personal data processing
You must give your consent to the processing of personal data
Subscribe to the newsletter
Stay up to date with HELYX news. We send out a newsletter once a week with only the most important information.