The unit is capable of receiving sludge with a very low concentration of suspended solids (0.5-1%). After thickening, the sludge (concentration 5-15%) enters the dehydration zone, where it is evenly distributed over the filter belt with the help of a distribution system.
After that, as the tape passes between the rollers, compression occurs and the subsequent separation of the sediment. In this case, the degree of dehydration achieved is determined by the passage time and the width of the gap between the tapes. Both of these parameters are adjustable.
At the outlet of the filter press, the sediment reaches a concentration of up to 25-30% of dry matter. Thus, the belt filter press has two functions: sludge concentration/thickening and sludge dewatering, so that its productivity is higher than that of similar units without a built-in thickener.
in Russia, with an area of 15,000 m2
in the market of water treatment and wastewater disposal
products are released annually
Fill out the feedback form to get a consultation
Call us
+7 (495) 419-34-98Write to e-mail
zakaz@helyx-systems.comSubscribe to the newsletter
Stay up to date with HELYX news. We send out a newsletter once a week with only the most important information.